• English
  • Deutsch
Professionelle Product Compliance Beratung

RAPEX Report on Thursday: Almost 850 dangerous products in Q3 2026 – 42% recalls

In the third quarter of 2026, a total of 848 dangerous products were reported in the EU Safety Gate. The portal, formerly known as the RAPEX system, enables market surveillance authorities in EU Member States to exchange information when dangerous products are identified. Once a product is discovered and reported in a Member State, further sales there are generally prohibited. Other Member States often follow by imposing similar sales bans or arranging recalls of the product concerned.

Electrical products, toys and chemical products are the largest categories

With 258 notifications, electrical and electronic products — including lighting, multimedia products, lighting chains and laser pointers — accounted for 30.4% of dangerous products, followed by toys (21.6%) and chemical products (6.8%). Cosmetics, which had been reported particularly frequently in previous quarters, accounted for a significantly smaller share in the third quarter (6.1%).

High numbers of product recalls

European market surveillance authorities ordered recalls for a total of 355 products (41.9%). Of the dangerous products, 19.7% were sold online. Ninety products (10.6%) infringed the REACH Regulation and 47 (5.5%) the RoHS Directive.

More than two thirds of dangerous products came from China

With 577 dangerous products, more than 68% originated in the People’s Republic of China. This marks another new high, as the share had generally been below 50% in recent months and years. For a further 64 products (7.5%), the country of origin could not be identified.

Most notifications in the third quarter came from Germany (17%) and France (14%), followed by Hungary (13%) and Northern Ireland (9%). More than 50% of all notifications therefore originated from just four reporting countries or territories.

Recalls: the real cost of non-compliance

Failure to meet legal requirements can have serious financial consequences. According to an Allianz study, a recall involving toys or electrical appliances generates direct costs alone of between €650,000 and €1,000,000. Added to this are expenses that are often underestimated: product modifications, changes to packaging and contractual penalties owed to trading partners.

Import bans, sales suspensions or customs delays can also result in six-figure revenue losses, even for medium-sized consignments. The most serious consequence is often long-term reputational damage, which can have a lasting impact on market position and business development.

Lockton estimates that around 80% of the actual total cost of a recall arises after the recall itself, through reputational damage, persistently lower sales and lost market share. These costs do not appear in insurance claims data.

Compliance pays off: from a cost factor to a competitive advantage

Against this background, an effective compliance management system is more than a cost centre. It is a strategic tool that strengthens the trust of customers and business partners and can become a real competitive advantage. Companies that establish clear processes and reliable controls early on reduce the risk of fines, lost revenue and reputational damage. They are also much better prepared for regulatory changes than their competitors.

GPSR: risk analysis and documentation have been mandatory since December 2024

The EU General Product Safety Regulation (GPSR) has been applicable since 13 December 2024. It is particularly relevant where no product-specific legislation applies, such as the Toy Safety Directive or Regulation, the Low Voltage Directive or the PPE Regulation.

Since then, all products concerned have required a comprehensive risk analysis, supported by technical documentation demonstrating product safety. Careful, structured documentation is therefore no longer an optional extra, but an integral part of any forward-looking compliance strategy.

Packaging: conformity obligations have applied since 12 August 2026

The new Packaging Regulation has applied since 12 August 2026. This means that every item of packaging also requires a declaration of conformity and the corresponding technical documentation.

Much of the necessary information is usually held by the manufacturers of the packaged products or by packaging suppliers. However, responsibility for the technical documentation and declaration of conformity lies with the companies that have the packaging designed or developed — the entities referred to as “manufacturers”. Many companies are not yet aware of this allocation of responsibility.

Dangerous electrical equipment

Of the 258 electrical products reported, 191 (74%) posed a risk of electric shock or fire. A further 18.6% posed an environmental risk. Overall, more than one in two products (52%) was subject to a recall. Of the products, 87.2% originated in China; for a further 6%, the country of origin was unknown.

Electric grinder posing a risk of cuts

An electric grinder could be operated with the lid open, allowing direct contact with the grinding blade while it was moving. This could cause serious cuts to the user.

The product was also fitted with a flat, two-pin Europlug without an earth connection, which did not provide adequate protection against electric shock. The user could receive an electric shock when touching the product during use.

The product did not comply with the requirements of the Low Voltage Directive or the European standards EN 60335-1 and EN 60335-2.

Dangerous cutting machine
Fig. 1: Dangerous cutting machine

Source: European Commission, https://ec.europa.eu/safety-gate-alerts/screen/webReport/alertDetail/10118484, accessed: 9 October 2026, language: German

Eye damage caused by laser pointers and laser projectors

Spanish market surveillance authorities identified deficiencies in ten laser pointers and laser projectors from China and imposed sales bans. In every case, the laser beam was too powerful, with measured values of up to 6.75 mW, and most products were not correctly labelled. Looking directly at the laser beam could cause serious damage to eyesight. The products infringed the General Product Safety Regulation and the European standards EN 60825-1 and EN 50689.

Laser pointer with an excessively powerful beam
Fig. 2: Laser pointer with an excessively powerful beam

Source: European Commission, https://ec.europa.eu/safety-gate-alerts/screen/webReport/alertDetail/10118819, accessed: 9 October 2026, language: German

68 dangerous USB chargers

In the third quarter, market surveillance authorities in France, Denmark, Hungary and Finland identified deficiencies in a total of 68 USB chargers from China. Recalls were ordered for 38 of these products.

The defects varied. In many products, creepage distances and clearances between the primary and secondary circuits were insufficient. Users could touch accessible live parts and receive an electric shock.

Other products lacked sufficient insulation between the power supply’s mains connection points and the USB connection points. In some products, a poor front-panel design also allowed users to touch metal pins during insertion.

In addition, the plugs of some products did not fit securely into sockets because the plug face was undersized. This created a risk that a user’s finger could touch live parts during insertion. All these design or manufacturing defects could cause an electric shock.

USB charger posing an electric shock risk
Fig. 3: USB charger posing an electric shock risk

Source: European Commission, https://ec.europa.eu/safety-gate-alerts/screen/webReport/alertDetail/10118794?lang=de, accessed: 9 October 2026, language: German

Toys posing choking and strangulation risks

Of the 183 toys reported, 90 products posed a risk of choking or strangulation, while 63% presented a chemical risk. Of the dangerous toys, 89% originated in China and 32% were subject to a recall. Most notifications came from France, Germany, Lithuania and Poland.

Dangerous plush teddy bear

The plush teddy bear reported by the Lithuanian authorities had a small part — its nose — that could easily detach. Young children could put it in their mouths and choke. The product did not comply with the requirements of the Toy Safety Directive or the European standard EN 71-1.

Plush teddy bear posing a choking risk
Fig. 4: Plush teddy bear posing a choking risk

Source: European Commission, https://ec.europa.eu/safety-gate-alerts/screen/webReport/alertDetail/10119117?lang=de, accessed: 9 October 2026, language: German

Football containing excessive levels of DINP

The plastic material of a toy football with a world map design contained an excessive amount of diisononyl phthalate (DINP), with a measured value of 23.6% by weight. DINP can harm children’s health by potentially damaging their reproductive systems.

The product did not comply with the requirements of the Toy Safety Directive or the REACH Regulation. The Finnish authorities required the products not only to be withdrawn from the market, but also to be destroyed at the importer’s expense.

Football contaminated with DINP
Fig. 5: Football contaminated with DINP

Source: European Commission, https://ec.europa.eu/safety-gate-alerts/screen/webReport/alertDetail/10099587?lang=de, accessed: 9 October 2026, language: German

Chemical products reach new highs

Chemical products reached a new high in the third quarter, with 58 products reported. A total of 31 electronic cigarettes or components were reported, while a further eleven products were nail adhesives, shoe adhesives and other glues. There were also seven tattoo products.

Electronic cigarettes with numerous defects

Of the 31 reported electronic cigarettes and associated substances, most contained an excessive volume of nicotine-containing liquid, for example 60 ml, and an excessive nicotine concentration, for example 50 mg/ml. This could lead to the accidental consumption of a high dose of nicotine. Nicotine is acutely toxic and can endanger the user’s safety, particularly if the product comes into contact with the skin or is swallowed.

According to their labels, other products contained a psychoactive cannabinoid called hexahydrozepine. Use of this substance is associated with a risk of mental and behavioural disorders.

Some products also lacked a child-resistant closure, posing a chemical risk if handled by children. Nicotine is acutely toxic and can endanger the user’s safety, particularly if the product comes into contact with the skin or is swallowed.

The products did not comply with the requirements of the Tobacco Products Directive and, in some cases, the General Product Safety Regulation.

Electronic cigarette with excessive nicotine content
Fig. 6: Electronic cigarette with excessive nicotine content

Source: European Commission, https://ec.europa.eu/safety-gate-alerts/screen/webReport/alertDetail/10118933, accessed: 9 October 2026, language: German

Dangerous adhesives

Several of the eleven adhesives found to be non-compliant contained an excessive amount of dichloromethane, with measured values of up to 65.2% by weight. Dichloromethane affects the central nervous system, can impair the neurological development and behaviour of unborn children, and can cause cancer if inhaled.

Some products also contained cyanoacrylates, which can bond skin and eyes in seconds. However, the products lacked the required warning and hazard statements and did not have a child-resistant closure. Users were therefore not adequately informed of the hazards arising if the product came into contact with the skin and eyes.

The products infringed both the REACH Regulation and the Classification, Labelling and Packaging (CLP) Regulation.

Adhesive containing dichloromethane
Fig. 7: Adhesive containing dichloromethane

Source: European Commission, https://ec.europa.eu/safety-gate-alerts/screen/webReport/alertDetail/10118411, accessed: 9 October 2026, language: German

What are you doing to prevent product hazards and comply with legal requirements?

  • Do you sell electrical products, toys or chemical products?
  • How confident are you that all risks associated with your products have been fully considered?
  • How do you ensure that you know and comply with the current standards?
  • Have you prepared a risk analysis for all your products that you could provide to the authorities on request?
  • Do you comply with the new Packaging Regulation, and do you have declarations of conformity for all your packaging?
  • Are all your suppliers familiar with the requirements of the REACH or POPs Regulations and the relevant harmonised European standards?
  • Do you have complete technical documentation for all your products, as required by the new General Product Safety Regulation?
  • Do you have meaningful test results and documentation from your suppliers regarding the chemical and electrical components of your products?
  • How well prepared are you for a product recall, and have you established a product recall management process?

If you see a need for action, we will be happy to help you identify potential risks and avoid additional costs caused by dangerous products.

We support you in establishing appropriate risk management and guide you through the conformity assessment process, including the preparation of technical documentation, risk analysis and the EU declaration of conformity.

What does that mean for you?

Book our free initial consultation.
Save €249!

Avatar photo
Dr. Hartmut Voss
Dr. Hartmut Voss is the founder and managing director of trinasco GmbH and an expert in product compliance management.

What does that mean for you?

Book our free initial consultation.
Save €249!

Other interesting articles

Our references

trinasco GmbH

Bei den Mühren 1
20457 Hamburg
040 46 86 80 00

Some images on this website were created using AI image generation and serve as illustrative representations of our services.

Cookie Consent with Real Cookie Banner